9OPERATION SWITCHING ON/OFF THE UNIT Press PWR/MUT button (23) to switch on the unit. When system is on, press and hold PWR/MUT button (23) to turn
10OPERATION The reset button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. - All t
11OPERATION PREVIEWING TRACKS Press SCN button (6) to play first several seconds of each track on the current disc. Press again to stop intro and l
12OPERATION 3) DISPLAY INFORMATION Press DISP button (22) to show the following information, such as the clock, ID3 TAG (if available: song title, di
13REMOTE CONTROL 1. VOL+: Volume Up Button (Character Select (A, B~8,9,0, _,-,+) For MP3/WMA Operation) 2.
14SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls -
15TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult
1642CA OWNER’S MANUAL Mobile Audio System y PLL Synthesizer Stereo Radio y CD/MP3/WMA Player y Automatic Memory S
2CONTENTS Installation...3 Take out screw before installation...3 DIN Front-Mount (Method A)...
3INSTALLATION Notes: y Choose the mounting location where the unit will not interfere with the normal driving function of the driver. y Before fina
4INSTALLATION (1) Front panel; (2) Outer trim ring; (3) Sleeve; (4) L key; (5) R key 6. Mount the sleeve by inserting it into the openin
5INSTALLATION 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the das
6 REMOVING THE FRONT PANEL 1. Press the release button on the front panel and pull off the front panel. 2. Keep front panel into the case.
7WIRING CONNECTION FOR 50X4W SYSTEM
8OPERATION LOCATION OF KEYS 1. release button 2. (tune/seek/track up
Commentaires sur ces manuels